Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

driving the motor of an actuator..

Status
Not open for further replies.
J

jungardc2

Newbie level 5
Joined
Feb 16, 2010
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Philippines
Activity points
1,348
hi newbie here..

i need to control an actuator with a PIC16F628A and the program should be in PICBASIC..

but i need a circuit between the PIC and the motor of the actuator..

the actuator's motor is clockwise and then counterclockwise..

can any1 help.
:cry:
 

A simple H Bridge circuit will do the job. Better use L297D chip.

Nandhu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top