Hi
I want to plot simple array of data in ADS smith Chart
Smith chart is a plane of reflection coefficient not impedance.
So you have to plot Gamma not Zload.
Zload=[0.1::0.1::3]
Gamma=(Zload-50)/(Zload+50)
Simply any complex value.I don't understand what ADS is drawing?
What do you want to mean ?Is it drawing ref coeffs?
I assumed your Zload is unnormalized, so I calculated Gamma with Rref=50.where did it get the characteristic impedance?
Simply any complex value.
Assume complex value, aho=boke+j*kasu.
Plot aho.
Plotted data is located at horizontal=boke and veritical=kasu.
That’s all.
What do you want to mean ?
No.Unfortunately it is not simply drawing any complex value that we are introducing as input! try it once.
You can not understand axises of smith chart at all.My mistake was that I expect it to draw the exact input value on the chart.
Surely see and understand my first response.Smith chart is a plane of reflection coefficient not impedance.
So you have to plot Gamma not Zload.
Zload=[0.1::0.1::3]
Gamma=(Zload-50)/(Zload+50)
I don't understand what ADS is drawing? Is it drawing ref coeffs?
so where did it get the characteristic impedance?
Very Very Wrong." will draw the normalized Impedance that will result in the input ref coef ".
Very Very Wrong.
ADS does not draw the normalized impedance.
Surely learn very basic things.
https://www.edaboard.com/showthread.php?383512
Very Very Wrong.what your said is exactly what I said !
you'r just naming normalized Impedance aho!
Simply you can not understand basic things including Smith chart correctly.I think you've just confused your self with your new names
Simply you can not understand basic things including Smith chart correctly.
Right.Every RF engineer can read normalized impedance from Smith Chart.
Such silly question is nonsense for me.Do you understand normalized impedance?
No.There is no need for "marker calculation", just properly read the Smith chart.
Marker readout is necessary since grids are rough.
However this thread's issue is software implementation.Surely learn difference between RF fundamentals and software implementation.
See attached figure.If you are not agree please show it on a ADS smith chart AND Not simply speaking and taking time.
Very fortunately it is simply drawing any complex value aho.Unfortunately it is not simply drawing any complex value that we are introducing as input! try it once.
Wrong.My mistake was that I expect it to draw the exact input value on the chart.
I'm correct.Please Give it a try,
And see.
You are Wrong about what ADS is doing.
Wrong.It's Obvious that Smith chart is not drawing the complex input it self!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?