Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Doppler radar circuit??????

Status
Not open for further replies.

savvasn

Member level 1
Member level 1
Joined
Aug 17, 2001
Messages
41
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
silicon valley
Activity points
145
radar circuit

Hi all

Simple Doppler radar circuit

Basically is a form of transmitter and receiver which may also used as simple Doppler radar.
This is the following diagram i have for the doppler radar.

But i can not find any circuit related with my bolck diagram.

Any ideas wher i can find some info (books / web pages)


Thanks a lot
_________________
 

simple radar circuit

savvasn;

I'm not sure if you want weather or navigetion doppler so-

for weather try h**p://###.chmi.cz/meteo/rad/pub/wds99_dop/
(I think it was meteo or try metea)

for navigation try ###.radarpages.co.uk/theory/ap3302/ sec1/ch5/sec/ch553.htm

I found these (and more) on google
I used keywords -- doppler radar theory

I hope this helps.

WA
 

doppler radar circuit

thanks for your help

For theory its fine but this it will not help me to design my circuits.

I need circuits :D :D
 

radar circuit diagram

This topic is very interesting. If No reference circuit or web can be found,
why we design one.
Which frequency band is your interested ?

ms1234
 

doppler circuit

VCO frequiencies are typically in the 900-1500MHz range
 

circuit diagram of doppler radar iii

VCO can user Delta, please ref.
h**p://***.deltaww.com/pdf/VCO-302E0205.pdf
Mixer can use Hittite HMC207S8, HMC208MS8 or other vendor like Minicircuits.
IF circuits is more easy to find the parts.
after IF circuits, I think a frequency counter or frequency to voltage converter is needed.
SPDT and SG, I think that is for test or calibration, so may be neglected.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top