Sep 29, 2014 #1 A arunmaran10 Junior Member level 2 Joined Jan 2, 2014 Messages 22 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,435 Hi All, Does Kicad support for Micro blind via? Say i am using micro vias of 10mill pad and hole 4mil. I can route on the 1-2 or 6-5 for 6-layer board. But inner layers it is not supporting(2-3,3-4.4-5). Please suggest some solution.] Regards, Arunmaran
Hi All, Does Kicad support for Micro blind via? Say i am using micro vias of 10mill pad and hole 4mil. I can route on the 1-2 or 6-5 for 6-layer board. But inner layers it is not supporting(2-3,3-4.4-5). Please suggest some solution.] Regards, Arunmaran
Sep 29, 2014 #2 M marce Advanced Member level 5 Joined Feb 23, 2010 Messages 2,080 Helped 627 Reputation 1,256 Reaction score 633 Trophy points 1,393 Location UNITED KINGDOM Activity points 14,410 As most modern day SMD footprints are hard metric and as mm is a standard unit why not work in metric, its a lot better. For inner layers a conventionally drilled via is used or stacked microvias, read this: https://www.we-online.com/web/en/in...hdi/02072013_Webinar_HDI_DesignGuide_1_EN.pdf
As most modern day SMD footprints are hard metric and as mm is a standard unit why not work in metric, its a lot better. For inner layers a conventionally drilled via is used or stacked microvias, read this: https://www.we-online.com/web/en/in...hdi/02072013_Webinar_HDI_DesignGuide_1_EN.pdf