Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

dimming incandescent using microcontroller and optocouplers

Status
Not open for further replies.

alina khan

Junior Member level 1
Joined
Dec 21, 2011
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,373
i want some information about controlling firing angle....and dimming my incandescent bulb i am using moc3020...

any circuit or any information about dimming using microcontroller and optocouplers

thanks
 

Just open the datasheet and refer to the application diagram of MOC3020. Light dimming application of MOC by gate triggering an SCR is shown. You can connect the circuit directly with a port pin of 8051 or a PIC processor and easily code for firing angle adjustment.
 

do you have any code showing firing angle adjustment????
 

thank you so much .............. let me do more work on this..........i will surely disturb u ppl again

---------- Post added at 17:19 ---------- Previous post was at 16:29 ----------

i want same circuit with 8051 :(
if any one knows plz let me know..............
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top