Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Difference between PVS and Assura check ?

Status
Not open for further replies.

Prashanthanilm

Full Member level 5
Full Member level 5
Joined
Aug 24, 2012
Messages
302
Helped
36
Reputation
72
Reaction score
36
Trophy points
1,308
Visit site
Activity points
2,950
Hi ,

Both PVS and Assura LVS is from Cadence!.

But what is the difference between these tool?
 

Prashanth,

Cadence PVS (Physical Verification tool) is an advanced DRC/LVS engine for DRC and LVS check. PVS is specifically for technology nodes below 45nm.

Cadence Assura is an older LVS engine which can be used for technology nodes above 45nm.. i.e, 180nm, 130nm.etc.,

Summary : PVS for 45nm and smaller Geometry
Assura for technology nodes above 45nm .. Assura does not work for nodes below 45nm.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top