Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Dial up Modem and GPS using sierra wireless HL modem

Status
Not open for further replies.
B

bobdxcool

Member level 5
Member level 5
Joined
Mar 9, 2012
Messages
82
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
2,042
I have a HL6548-G and a HL8548-G module with me. I wanted to implement a dialup modem for these modules. I was thinking of using wvdial in linux for this purpose. Anyone else has any suggestions ? Also, I also need the GPS data from the module for which I have to use AT commands in my code. With the modem working as a dial up modem, will sending AT commands to the modem to get GPS data be an issue ?

Also, when I connect the modem to my linux based controller, I see 6 ports (ttyS0,S1 etc). Of these which is the data port, GPS port and which is SMS port ?

Can I use all three (GPS,dialup,SMS) simultaneously ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top