Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Device ID for PIC16f887

Status
Not open for further replies.
W

wstafford

Newbie level 1
Newbie level 1
Joined
Jun 19, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
8
Trying to program the PIC16f887 using MPLAB v8.90 andPICKit3. Returns "Target Device ID(00002080) does not match Expected Device ID(000009a0). Using target P/S. Microchip has been unable to aid me. Have checked the wiring until they are nearly worn out from looking. I'm using a breadboard with only the wire necessary to program the device. Same error as with a fully loaded breadboard with LED's. Also tried MOLAB X with the same results.
Anyone with any ideas?
Thanks,
Wes
 

Hello,

Make sure that you choose correct chip in settings. Device ID 0x9a0 corresponds to PIC16F877 but your chip is PIC16F887 (ID = 0x2080). It's correctly identified by your PK3.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top