Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Designing Automatic Voltage Stabilizers

Status
Not open for further replies.

gccute

Junior Member level 1
Joined
Oct 20, 2010
Messages
15
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
delhi
Activity points
1,468
HEY GUYS,

Need help in designing Automatic voltage stabilizer .... what will be the logic behind designing and what type micro controller to be used for this purpose.


need your support please.

Thanks.
 

Re: Voltage Stabilizer using microcontrollers.

AC or DC stabilizer? i guess you want to designing an AC stabilizer. look at EFY magazines august 2010 on page 64, has voltage stabilizer using 16F877A build by prof. K. Padmanabhan, S. Ananthi and Narayana Kumar. its a static voltage regulator, not a servo.
 
Re: Voltage Stabilizer using microcontrollers.

Are you using analog or digital ,or Micro-controller ?
Use comparator (LM324) its simple
please specify your needs i can help you .
 
Re: Voltage Stabilizer using microcontrollers.

i hope gccute need & also i have need Design of single phase stabilizers transformer. its as

1_ i\p 90 volt to 290 & o\p 200 volt to 240 volt.

2_i\p 140 volt to 440 & o\p 200 volt to 240 volt.
 
Re: Voltage Stabilizer using microcontrollers.

Ok What is accuracy?
 
Re: Voltage Stabilizer using microcontrollers.

but which type circuit you need analog .digital or microcontroller ?
 

Re: Voltage Stabilizer using microcontrollers.

but which type circuit you need analog .digital or microcontroller ?

as pasibal pic 16f676 or 16f72 ?
 
Last edited:
Re: Voltage Stabilizer using microcontrollers.

hi
Can you please share the circuit of a AC stabilizer using LM324
 
Re: Voltage Stabilizer using microcontrollers.

hey guys,

need help in designing automatic voltage stabilizer .... What will be the logic behind designing and what type micro controller to be used for this purpose.


Need your support please.
Thanks.

try this circuit diagram
digital stabiliz.JPG
 
Re: Voltage Stabilizer using microcontrollers.

Thanks Irfan, I am going to make this circuit on proteus and check the operation if you can send me the controller program,

I have another circuit which I want you to confirm the IC's numbers I think they use 16F876A and LM324, Please check and confirm.

One more thing let me know the operation of relay it will operate one by one as per variation of voltage

Thanks again
 

Re: Voltage Stabilizer using microcontrollers.

try this hex file
 

Attachments

  • 100V stabalizer 4-11-12.rar
    1.5 KB · Views: 800
Re: Voltage Stabilizer using microcontrollers.

Thanks Irfan, its really great help. Would you please let me know the switch of relays on voltage variations.

Please
 

Re: Voltage Stabilizer using microcontrollers.

Can u plz help me with lm324 stabilizer circuit ?
 
Re: Voltage Stabilizer using microcontrollers.

I am send the diagram of my auto transformer, Can you please let me help on relay wiring

- - - Updated - - -

pls see the attachment

- - - Updated - - -

Transformer.JPG

Please find the attachment
 

Re: Voltage Stabilizer using microcontrollers.

try this hex file
hi, this hex file is not working properly.
I checked it, in real time simulation.
I think you write this code with CCS compiler.
Only timer,over and under voltage section is ok.
And stabilizing section is not working.
All 3 relays become off at same time, when adc volts are 1.6v.
And become on together, again at 2.45v.
Over voltage occurs at 2.55v.
Over voltage restores at 2.40v.
 
  • Like
Reactions: tpetar

    tpetar

    Points: 2
    Helpful Answer Positive Rating
Re: Voltage Stabilizer using microcontrollers.

TRY THESE .
1) Follow the diagram properly (transformer tapping must be same as diagram ).
2) Give 220v to stabilizer and Tune variable and to set output same as input.
3) use variable transformer to check it .
 
Re: Voltage Stabilizer using microcontrollers.

Give 220v to stabilizer and Tune variable and to set output same as input.
Of course, at that time all 3 stabilizing relays should on (energized).
Can you measure dc volts on pin 13, when output and input is same 220v ac.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top