Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Designing a vivaldi antenna in CST MWS

Status
Not open for further replies.
A

Ayman_El_Bacha

Newbie level 1
Joined
Jun 9, 2016
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
8
Hi,

Guys I have a problem when designing a vivaldi antenna that operates from 1 GHz to 28 GHz in cst.

I have red many posts about the vivaldi on edaboard, however I have tried to use the spline but don't know how to implement the exponential for tapers.
If anyone have a solution please don't hesitate to give me, or if anyone could send to me the design from "antenna magus" with the frequency mentioned above I would be thanfull.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top