Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Designing a depth measuring device

Status
Not open for further replies.

azfar-adib

Newbie level 6
Joined
Oct 2, 2009
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Advertisment removed
Activity points
1,423
I need to design and make a device that will be able to measure the depth of sea.I am considering to design an echosounder, but if itz feasible than other technologies can also be chosen.

My requirements:

1. The device will be placed in fishing boats and it should be able to measure depth in deep sea,where the average depth is 2000 meters.

2. The device will get a limited amount of power supply,as our plan is to make it a solar powered device.

Can anybody provide any suggestion/reference about this? Thanks.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top