Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Design of gap structure used in photo conductive switches in CST

Status
Not open for further replies.
H

Henry797

Member level 3
Member level 3
Joined
Jul 18, 2014
Messages
56
Helped
4
Reputation
8
Reaction score
4
Trophy points
8
Visit site
Activity points
495
For an optically switched transmission line, can anyone suggest me for an optimum gap dimension or perhaps any specific design to start with, in order to construct a gap structure which is basically a Si switch, activates (conducts) during illumination and remains open in dark conditions (in CST). And also if someone has already been able to demonstrate this in CST, pls also let me know how to optimize the transmission line circuit? [The effect of light can be taken into consideration by changing the effective conductivity of the Si switch]
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top