Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Design of a planar inductor in ADS

Status
Not open for further replies.
P

pir0texnik

Member level 3
Joined
Aug 7, 2005
Messages
64
Helped
15
Reputation
30
Reaction score
11
Trophy points
1,288
Activity points
1,736
I want to design a planar inductor in ADS. I made a simply model for Momentum and insert in into the circuit (fig1). After simulation I got results shown on fig2...
What does it mean? How correct simulate inductor? I tried to simulate planar coil inductors, but results was similar, on 0Hz current was 0.

Help, thank you!
 

Hi

upload your ADS project files.
I will help you.
 

Here is the file. There is the simplest consrustion of the inductor in this project, but I tried to do more complex topology such as meandered line or others, but with no success. :-(
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top