Design of 3 phase ac to dc power supply

Status
Not open for further replies.
U

usman umar

Newbie level 3
Joined
Feb 11, 2013
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,303
i am designing 3 phase power supply. out put from alternator is 28 v , 206.4 A , 100 hz , 0.8 pf..
now i have to use a 3 phase rectifier . DC 28 V is needed at o/p.

what is the output power after rectification . current also? formula??
how to design a capacitor if we want max ripple voltage = 28mv?
how to measure ripples(any cct)?

thanks
 

Getting 28mV of ripple at that current level is practically impossible with a rectifier alone, you would need many tens of farads of capacitance. You will likely need a SMPS as after the rectifier to regulate that ripple down to something realistic.
 

o/p power of alternator= 1.73*28*206*0.8 = 8 Kw

now after 3 phase rectifier
output voltage= 1.35*V = 1.35*28 = 37.8 v
output current of rectifier is I=8Kw/37.8 = 211.6 A

IS above mentioned calculations are true?
also how to design a capacitor for filter? any equation
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…