Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Defining new material

Status
Not open for further replies.
H

hoppaaa

Newbie level 3
Newbie level 3
Joined
Dec 22, 2012
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,308
Hello, i'm supposed to use a Ferro ULF140 LTCC tape with a dielectric constant 14 and Tand=0.001 for my design, which i'll probably have to define myself in Hfss 13. Can anyone point me somewhere i can get information about equations i need for defining new materials? when i try to create new material the values i'm supposed to assing are rather complicated for my knowladge..
 

hi.
plz do these steps:
default material>in material tab,select add material>fill the table of values>select validate material and then ok.
Good Luck
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top