Hi,
I am testing a simple program of Blinking two LEDs with 8051 uC, one LED will blink all the time and another will toggle during an interrupt. I am using proteus simulator and keil v5. Debugging step by step of the code in keil shows it ok while running the code is not giving satisfactory output with interrupt LED. Proteus is also not responding with Interrupt LED which is connected with P2.3 and supposed to be toggle with interrupt in INT1 pin of 8051. I have attached a .rar file which contains the project file.
Please help me.
Thanks for your reply. I have now used no delay but only toggling of the LED connected to P2.3 with interrupt 1. So now it is working in Keil V5. But can you tell me why this effect is not showing in the simulator. Actually when I run the simulator, The
LED connected to P2.0 is blinking fine as per the code, but why this is not ok with the interrupt LED. Please help me.
Thanks for your reply. As you have mentioned, I have done the same. I have attached my modified code and circuit. But still the Proteus simulator is not toggling the Interrupt LED at P2.3 with pressing the spst switch in P3.3 (external interrupt 1). But with KEIL v5 the code is working fine. I could not understand what is the issue with Proteus simulator. Please help.