Hi,
What do you expect?
It´s not the FT232 that causes the problem.
You feed it with binary data and it is received by the hyperterminal as binary data. But Hyperterminal can´t display binary data.
***
If you don´t think this is the problem, then describe/ show how you "send the 8 bit counter value to the FT232".
And how you expect it to be displayed in hyperterminal.
***
There are lots of people here, able to review your VHDL code...
Klaus
- - - Updated - - -
Hi,
setup: Baudrate, handshake, number of stop bits,
(don´t use software handshake XON/XOFF)
There are a lot of free terminal tools. (most of them are better than hyperterminal).
Klaus