Cycling lights everywhere

[Unmesh Sawant]

I SAW ONLINE FOR A FEW PRODUCTS FOR LIGHTING CYCLES BUT THEY ARENT CHEAP
I THOUGHT OF MAKING SOMETHING

I AM MAKING A BRAKE LIGHT
A 2 WAY SIGNAL LIGHT FOR TURNING LEFT AND RIGHT AND A SPOT LIGHT OR HEADLIGHT

i have a plan ready for headlight and brake light but these turn signals are not cracking out

i have a enclosure i have bolted leds like this

o o
o o
o o o o o o
o o
o o

so how do i lit them one by one
i mean when i switch towards left i should lit from 3 - 3 - 1
and vice versa i tried with lm 555 but every thing lights up
need help quickly

i thouth of using microcontroller

plz suggest something

- - - Updated - - -

here how it looks when drawn

 

[chuckey]

You could use a divide by three counter, driven by your 555 oscillator. You could use three 555s monostables each one firing the next .
Frank

 

[Unmesh Sawant]

thanks frank but could yu tell it in detail also would you tell me the shematics

- - - Updated - - -

sorry dude i didnt find any circuit diagram i would be my pleasureif you post it too

Thanks bro

 

[Unmesh Sawant]

hey guys i came up with an idea plz tll me if it will work or not

first when i switch the (on-off-on)sithch to left (i.e)on the leds will light up sequentally due to 555 timr and cd 4017
then i will use a relay for it then to turn right the switch goes to right and then the same process

IT is atlast Solved BUT i had a doub that will the relay work here '
The relay will be a 6v dc one
i am just concerned about the relay
hope you understand my need of emergency and help really fast

thanks
UNMESH

 

[Unmesh Sawant]

seems no one wanna help me with this

 

[Unmesh Sawant]

I am making some turn lights for my cycle i have a post (https://www.edaboard.com/threads/313488/)
but need some help

i am working with lm555 timer and cd4017 for sequential
my question is how do it for left and right (turn signal) should i use a relay or some stuff like this

I need your serious help

also check the other shematic
I thought using a single 555 and give its output to an on off on switch and the on sides will have 4017 (this is for sequence relay )

and i had a doubt that if i use the second shematic with my idea (this is for 10_1239....)

Hope you have understood it

thanks in advance

NEED YOUR HELP AS QUICKLY AS POSSIBLE

 

[chuckey]

Post your schematic and what the problem is. There is no problem about getting a 6V relay, but a transistor will use less power.
Frank