Apr 12, 2017 #1 S sabu31 Advanced Member level 1 Joined Jan 28, 2011 Messages 455 Helped 12 Reputation 24 Reaction score 13 Trophy points 1,298 Activity points 5,224 Hi I want to design a custom board for TI micro-controllers (F28027) instead of using experimenter kits. I would like to know what are pins are required such as for programming/clocks, Vdd etc.
Hi I want to design a custom board for TI micro-controllers (F28027) instead of using experimenter kits. I would like to know what are pins are required such as for programming/clocks, Vdd etc.
Apr 12, 2017 #2 G Garyl Full Member level 5 Joined Mar 28, 2017 Messages 253 Helped 6 Reputation 12 Reaction score 7 Trophy points 18 Activity points 2,633 Which exacly device are you going to use? You need to look at the datasheet, you can also look at the schematics of the other boards. Then you will need to use some EDA program, like Eagle, or so.... to design your PCB Designing a board is a hard task, I'm not sure if you're ready for that, judging by your question.
Which exacly device are you going to use? You need to look at the datasheet, you can also look at the schematics of the other boards. Then you will need to use some EDA program, like Eagle, or so.... to design your PCB Designing a board is a hard task, I'm not sure if you're ready for that, judging by your question.