Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Current flow in PFET is bidirectional?

Status
Not open for further replies.
T

treez

Guest
Newbie level 1
Hello,

Can current flow just as easily in either direction in a PFET, as long as the channel is enhanced?

.......i realise that it can't in a PNP, but a PFET is different right?
 

Yes, current can flow in either direction in a FET as long as the gate-source voltage is sufficient to turn on the FET. That's the basis for using a FET as a variable resistance.
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top