Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST Microwave

CST Microwave

Quick Overview

Category
Uncategorized
Language
Total members
164
Total events
0
Total discussions
35
Total views
2K
Total albums
0

CST microwave interface to design studio

Status
Not open for further replies.

JalalTN

Newbie level 3
Joined
Apr 18, 2019
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
33
The amount of energy that a wire receives (or emits) depends on its impedance. This impedance is a function of the environment around the wire. A wire laid out above the ground plane is an example of this dependency. If we change the distance to the GND plane, the current flowing in the wire (i.e. during emissions) will change. This impedance is generally different from antenna's impedance. CST microwave/DS does not show this impedance, at least explicitly. Is there any 3D EM simulation that can give this impedance? I want to use it directly in pspice.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top