Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

crystals/sesonators what for mcu?

Status
Not open for further replies.

tarts

Member level 2
Joined
Dec 13, 2009
Messages
43
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,615

Hi,

Resonators will work fine unless you are doing some extremely critical timings; just be aware that there are two types, the 3 pin ones with capacitors built in, and the 2 pin without. which need them adding in your circuit.
Usually find picking the larger sized smd parts makes for easier assembly if you are hand soldering - trying to solder 0201 or smaller caps is a real pain
 
  • Like
Reactions: tarts

    tarts

    Points: 2
    Helpful Answer Positive Rating
Thanks ,I'll buy the cheaper one then. Timing is not very critical.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top