Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

crossed yagi for sat reciever

Status
Not open for further replies.
The feed should be made with a delay section of the feed line. Consult e.g. the ARRL Radio Amateur's Handbook or ARRL Antenna Handbook for details.
In principle the delay section is a quarter-wave long feed line. As coaxial cables have a dielectric inside, you should use the "shortening" factor available from cable specifications.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top