Hello guys,
Thank you for your replies.
I did solve the problem, sort of. What I wanted was to run all the corners automatically and get all the results in a file.
So what I did was to use a Matlab script that has some 'for' loops for VDD, TEMP, Process Corners (ff, sf...). Then I placed these 'VDD' and 'Temp' values in a file for parameters; 'Process Corners' were added in a file to be included in the library.
I then tell PSpice to include the two files for parameters and libraries in the circuit description and run the .cir file in ELDO.
By doing so, I get #VDD*#Temp*#Corners Folders, each containing simulation results.
I don't know if this is the best solution to extract Corners Results using PSpice+Eldo, because now I have to come up with a script that takes the results for each Corner and places them in one big file, Excel or some other friendly format. In particular, I will have to extract the DC Gain, GBW and PM of an Amplifier, from .chi or .wdb files.
Any ideas?
Thank you!