Today I played and, sb +5v present,on power on green wire should has also 5v but has 2.7v
On pfc ic cm6806+x on vcc pin no power, there is smd pnp that has +13.5v on emitter but not switching transistor(collector goes directly to vcc pin of ic)
I shorted E+C on small pnp and all powers cones alive,12v 3.3v 5v but of course works without connecting green wire to gnd on connector
Cant find what switching this small pnp
Tnx
- - - Updated - - -
Update,actually no VCC to IC PS223,It should get from +5vSB, but there is no, when I bring with bridge +5v from SB voltage to VCC pin then all function as normal,when I grounded green wire psu has all voltages on output....now should find why not get +5v this ic,
P.S. now when start psu cm6806+x on vcc is ok 13.5v switched via pnp tr
tnc