hi,
i am using a usb web cam. it has a very short cable and i want to make it wireless using a 343 TX/RX module.
can anyone explain me how the data flow of the cam be configured with the wireless module.
thnks.
---------- Post added at 12:58 ---------- Previous post was at 12:56 ----------
if possible, please tell me the functions of the four pins of a usb port and how data flows in it.
Its not possible. Because..
1. Bandwidth of your module too low.
2. USB is very complex in nature while comparing with UART or other standards.
3. There should be mc with USB host to receive images from camera.(Like ARM,PIC32,AVR32,PIC24 etc)