Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Connecting Wonderware InTouch + Soft PLC + Simulink

Status
Not open for further replies.

linkorn86

Newbie level 3
Joined
Feb 7, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,299
Hi everyone!
I'm new here, and I have some problems that I can't solve by myself...!!

I have to do a plant simulation in a computer, connecting Wonderware Intouch with some Soft PLC through OPC, and this Soft PLC to Simulink. I'd like to know which Soft PLC is good for this connection, and how to connect them. Also I've heard there is something called PAC, that is similar to a Soft PLC, but I don't know if I can use a PAC instead of a Soft PLC, or which is better.

Which Soft PLC or PAC should I use?

Thanks!
 

Carlyn

Newbie level 1
Joined
Feb 8, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,285
HI. Would recommend you view the Invensys Operations Management website to find your local distributor who can answer your question.

Regards,

Carlyn

---------- Post added at 10:44 ---------- Previous post was at 10:42 ----------

Wonderware Contact Sales
 

linkorn86

Newbie level 3
Joined
Feb 7, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,299
I contacted them and I asked them, but they don't give me any information about any SoftPLC, and I don't know why..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top