Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

connecting to TI DSP target through usb instead of parallel

Status
Not open for further replies.
S

sm1362

Newbie level 4
Joined
Apr 14, 2010
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,313
hi everybody

I have a project with ccs related to c2000. Unfortunately, My computer only has usb port. Code composer studio is linked with target through parallel port. so i use a parallel 2 usb converter. when starting code composer it gives an error message:

Error initializing emulator

I/O Port = 540

Board Name: R2812 eZdsp
Cpu Name: cpu_0

Abort: Close Code Composer Studio.
Retry: Try to initialize the emulator again.
Ignore: Ignore the initialization error and start
potentially without target debugging access.
Diagnostic: Run diagnostic utility.


is it possible to connect to target through usb port in this way? or is there any other solution?

thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top