Connecting GPRS modem to the Internet in Iran

[NAEIMWTG]

gprs iran

Dear Sirs/Madams

I have problem with connect GPRS in Hyper Terminal application .I want with GPRS send information to Database server in my office because when connect gsm modem by at command in hyper terminal I see :


but our purpouse is to connect the GPRS modem to the Internet and connect to database

Configure Gprs in iran :
APN:mtnirancell
Wap Proxy : 10.131.26.138
Port:9201
Service=CO-WSP
Http Proxy:10.131.26.138
Port :8080
Service=HTTP

Database server in my office configure :
Database ip:217.210.100.1
Port :3065

Help me and send right at command Attention my Configure Please
Respectfully yours

 

[sabeti_1990]

iran apn gprs

hi
U can use sim300 as a client of a server or as a server with a valid IP for this use read this && much much enjoy
be success

 

[NAEIMWTG]

gprs in iran

hi

my database have valid ip . but i can`t send Correct at command in hyper terminal .with attention iran gsm /gprs Configure. plase send me Correct at command
tanx

 

[NAEIMWTG]

hyperterminal gprs

hi

i forget say this subject
if Create Manual connection between device + pc

Create Connection
=================

1) Go to control Panel -> Network Connections -> Create New Connection.
2) Choose new 'Connect to internet' on the new connection wizard.
3) Choose 'setup My Connection manually'
4) Choose 'Connect using dialup modem'& pick the data card as the modem
5) Type name as required 'naeimwtg' etc
6) Type in Phone number of '*99#'
7) Type in user name & password :empty
8 ) Untick 'make default connection'and firewall
9) Click Finish

*

i have`n problem and can connect to office database server .but when connect in hyper terminal i have problem



help me :?::?:

 

[sabeti_1990]

gprs+iran

hi

which module do U use ? tell me about that

 

[NAEIMWTG]

gprs in iran is

hi

i just test in pc with nokia N95
tanx

 

[sabeti_1990]

gprs edge internet forum iran

ok
U can't do that , making connection in hyper terminal is possible that U done it , but there are no AT command for stablish connection or sending data in hyper mode
because for this work U must to make NET packet , that U need an OS like windows for this .
U have 2 choice
1- do your work with vb or etc.
2- buy a GPRS module & make your connection by a micro controler like "ARM controler that have command for these works {networking}"

be success