I am trying to implement data transfer between my FPGA board and PC.
I have some questions:
I should say in advance that I have USB to UART bridge converter on my board.
1- when I send the the data from PC to FPGA, is it save in the internal memory of FPGA?
2- About interfacing the devices, should I use the instrumentation control toolbox in Matlab? is it the only way, or I can use other methods? please help me.
in general I wnt to send data from PC to FPGA, process it and send the processed data back to PC to analyze the performance.
If you have anu useful document or website , please let me know.
It can...but out of the box the FPGA doesn't nothing - It's empty.
If you want it to do anything useful you have to design and program it yourself.
2- About interfacing the devices, should I use the instrumentation control toolbox in Matlab? is it the only way, or I can use other methods? please help me.
This website is very useful.
But before any of that - make sure that you're familiar with how the fundamental elements of digital logic work: MUX, Encoder, Decoder, DeMUX, Flip Flops, etc...
This website is very useful.
But before any of that - make sure that you're familiar with how the fundamental elements of digital logic work: MUX, Encoder, Decoder, DeMUX, Flip Flops, etc...
Even before this website....The most important website to visit is Xilinx. Once you are there, download the documents on that page and read them. If you don't understand anything from the datasheet etc, then you probably need to educate yourself on a lot more than FPGAs and how to program them.