Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[PIC] connect rs 232 to mplab directly

Status
Not open for further replies.
I

Ilia Gildin

Junior Member level 3
Junior Member level 3
Joined
Sep 27, 2014
Messages
26
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
184
hello
I connected the picdem2 plus board to computer directly through rs232 cable to usb.
how can I connect to mplab thrugh this cable?
 

Hi,

Not a board I have used, but looking at the schematics the boards RS232 link is for serial connection to the Pics serial port, not for programming the chip which needs a hardware programmer like the Pickit3 or ICD3 connecting to the appropriate programming sockets as detailed in the user guide.

**broken link removed**
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top