CONFORMAL PATCH ANTENNA in FEKO

[JincyRachel]

i am doing my project in antenna design using FEKO software. I had already been through the official FEKO site regarding this matter. The video tutorial seems to rush through the part where the conformal antenna is made, giving a pretty unclear idea.I projected my patch antenna onto a surface that I made by lofting 2 elliptical curves. But, after the projection process, the antenna's feed appears as a suspect element. (a triangle with a question mark in the middle) and I am not able to proceed towards the meshing section.. The thickness of the patch antenna also appears to have been considerably diminished as well. Is there anything wrong with what I am doing? I used a line feed for my patch antenna. Can you tell me how to continue?
Thank you...

 

[sim4me]

Do you have a link to the video?

There's a how-to in the Help Centre on conformal patches. (Hope you have login!)

http://www.feko.info/support/helpcenter/how-to/how-to-construct-a-conformal-patch-antenna

 

[JincyRachel]

I dont hav login...