Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] cognitive radio simulation

Status
Not open for further replies.

GEETHA VANGA

Newbie level 3
Newbie level 3
Joined
Jun 12, 2013
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
25
I am working on Jelly fish attack on cognitive radios. I am using opnet, but i dont have any knowlegde on how to simulate it. plz help!!
 

I would do it by setting up an X-Y grid, 100 x 100 units square.
Some locations have a radio.
Some radios are a good guy. Some radios are an attacker.

During a time period of 1 mSec, some radios will go to a different channel.

Examine every radio.
If an attacker and good guy are located less than 5 units from each other, and they are on the same channel, then the good guy is jammed.

Increment the time marker. Repeat the above process.

I found out what is meant by cognitive radios, and attacks, by reading this article:

https://cs.ucsb.edu/~ravenben/publications/pdf/jam-icccn07.pdf
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top