Hello, i am trying to blink LED's which are connected to PA15 PE15 on my controller, as shown in the diagram bellow.
I have tried to look in the data sheet and reference manual for their memory locations and also for the clock gating address which enables the options for controlling PA15 PE15 , from the links bellow.
As shown in the tables bellow, i found that GPIO goes from 0X40007000 -0X40006000
but i coudnt find what addersess are relevant for PA15 PE15 and what clock gating addreses are relevant for enabling PA15 PE15.
please help.
Thanks. https://www.silabs.com/documents/public/reference-manuals/EFM32LG-RM.pdf https://www.silabs.com/documents/public/data-sheets/efm32lg-datasheet.pdf
Hello Clause, I intend to use Simplisity studio with the code shown bellow.
If i did the port connection correctly for given my efm32lg230 controller.
How to do the blinking , i know that i should some how put a delay because if it blinks to fast then i wont able to see the blinking effect at all.
Thanks.