hastidot
Junior Member level 3
Hi all
I'm using MIG as DDR2 controller in virtex5.
I created a cdc file for using chipscope. But while using the pins to trigger, only one bit of some registers appears in the list, but I need to trigger all (128 or 64) bits of the register. i don't know what the problem is.
I'm using MIG as DDR2 controller in virtex5.
I created a cdc file for using chipscope. But while using the pins to trigger, only one bit of some registers appears in the list, but I need to trigger all (128 or 64) bits of the register. i don't know what the problem is.