votientu
Member level 2
- Joined
- Oct 27, 2012
- Messages
- 47
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 1,647
Hi everyone, I have a little problem, could you help me ?
I consulted a paper about dual band using coplanar waveguide, I simulated it in CST,
but the result seemed very diffferent from that paper, I mean it was wrong.
Setting port is ok, beacause E at port is QUASI-TEM and similar to my privious cpw simulation.
Boudaries conditions are open and add space at all directions.
I think I shoud check the signal and change it, but I don't know how to do.
Could you help me,
Thank guys !
I consulted a paper about dual band using coplanar waveguide, I simulated it in CST,
but the result seemed very diffferent from that paper, I mean it was wrong.
Setting port is ok, beacause E at port is QUASI-TEM and similar to my privious cpw simulation.
Boudaries conditions are open and add space at all directions.
I think I shoud check the signal and change it, but I don't know how to do.
Could you help me,
Thank guys !
