Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Changing the rectungular data to tabular data in ADS 2008

Status
Not open for further replies.
B

btv_murthy

Full Member level 3
Full Member level 3
Joined
Nov 29, 2011
Messages
159
Helped
9
Reputation
18
Reaction score
9
Trophy points
1,298
Location
BANGALORE
www.edaboard.com
Activity points
2,719
Dear Sir,
I am beginner to ADS 2008 software, am learning now amplifier design using ADS 2008. I know how to plot rectungular data,don't know, how to convert the rectungular data to tabular data using ADS 2008. Herewith I am attaching the figures , in those figures, fig1 shows the rectunular data and fig 2 shows the tabular data. In ADS 2008 , I don't know , which option I need to use to convert the rectungular data to tabular data. I want to convert as like fig2 from fig1 is shown in the document.
 

Attachments

  • Fig.1.jpg
    Fig.1.jpg
    73.7 KB · Views: 76
  • Fig.2.jpg
    Fig.2.jpg
    83.8 KB · Views: 78

hi sir, i have emg signal stored in matlab as a matrix of data such as -22.1
-10
5
etc
how i can transfer this signal to 8051 in such away 8051 read my signal continously if it indicate the max(samples) take action,how i can do this
please help with codes
thanks in advance
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top