Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

chain blocking at isolation cells

Status
Not open for further replies.

ishanmmec

Newbie level 1
Joined
May 6, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
Hi.

Error: Chain chain0 blocked at DFF gate idig/test_so1_UPF_ISO after tracing 0 cells. (S1-1)

its giving a fatal while doing dft_drc... isolation cell is present before the scan output port.

how to skip isolation cells in scan mode, anyone can tell command for masking isolation while doing dft.
 

tyuga454

Member level 1
Joined
Feb 2, 2012
Messages
38
Helped
4
Reputation
10
Reaction score
3
Trophy points
1,288
Activity points
1,505
Hi,

I think you can define that isolation cell by using the "set_isolation_control" command
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top