Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Can't Reprogram PIC16F628A with Pickit2

Status
Not open for further replies.
i am able to program them very well with my pickit2 from Microchip as well as another full home brew version, thanks to 'computerman29' who uploaded a possible eagle artwork , later refined by others.

perhaps unfortunately you might be handling a damaged pic.
 

Sarma ji........... and what did 'computerman29' upload ?

You may be right , I could have bricked it, but , could not brick 3 of them. But still, I cannot rule out the possibility.

regards
 

the same microchip pickit2 complete version with through hole components, . it makes no spl meaning as op already has sure electronics make pickit2.

where did the op transfer the content to RB3, to get the pwm out?
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top