hi everybody!
I'm not successful in assembling the program of PIC16F628A which use INTOSC, 1827 lines. I use MPLAB IDE v6.6. The error shows 'the address range exceeds the maximum range for this processor'. What's the problem. Pls tell me quick!
Usually, this means your code is too big for the processor flash memory.
I would set the target device to the PIC16F648A and look at the listing file to see how many words you are using. If too many for the PIC16F628A, I suggest you use the 648 OR reduce your code to 2k or less.