Jan 16, 2015 #1 B bhargav.611 Newbie level 4 Joined Feb 28, 2014 Messages 7 Helped 0 Reputation 0 Reaction score 0 Trophy points 1 Activity points 49 Hi Guys I want to make dummy module for Canon camera battery (LP-E12) and provide power externally to camera but I can not find PIN OUT for battery. There are four PADs on battery from which two are for thermister and two are for power but I can not confirm which one is which. Please its urgent kind of help required. thank you in advance.
Hi Guys I want to make dummy module for Canon camera battery (LP-E12) and provide power externally to camera but I can not find PIN OUT for battery. There are four PADs on battery from which two are for thermister and two are for power but I can not confirm which one is which. Please its urgent kind of help required. thank you in advance.
Jan 17, 2015 #2 A ArticCynda Advanced Member level 1 Joined May 8, 2013 Messages 439 Helped 82 Reputation 164 Reaction score 81 Trophy points 1,308 Activity points 4,238 Measure with a simple multimeter between the pads. Between two you should measure 3.6 - 4.2V (which is the cell, immediately giving you the polarity) and between the other two you should measure 10kOhm - 20kOhm which is the thermistor.
Measure with a simple multimeter between the pads. Between two you should measure 3.6 - 4.2V (which is the cell, immediately giving you the polarity) and between the other two you should measure 10kOhm - 20kOhm which is the thermistor.