Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Canon camera Battery Pinout

Status
Not open for further replies.
B

bhargav.611

Newbie level 4
Newbie level 4
Joined
Feb 28, 2014
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
49
Hi Guys

I want to make dummy module for Canon camera battery (LP-E12) and provide power externally to camera but I can not find PIN OUT for battery.

There are four PADs on battery from which two are for thermister and two are for power but I can not confirm which one is which.

Please its urgent kind of help required.

thank you in advance.
 

Measure with a simple multimeter between the pads. Between two you should measure 3.6 - 4.2V (which is the cell, immediately giving you the polarity) and between the other two you should measure 10kOhm - 20kOhm which is the thermistor.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top