pavan_85
Member level 1
LPC2141
Hi,
We had prepared a target board based on lpc2141.
To test it we had written a simple program to toggle pins. we have checked the code in keil and proteus. that is working fine.
We have dumped the code using H-JTAG emulator. It got dumped.
our problem is that we are unable to find any output at the pins.
some times we are able to see it and some times not.
we have verified the reset pin, vcc and ground pins and found them ok.....
i dont know where it went wrong......
help us out......
pavan
Hi,
We had prepared a target board based on lpc2141.
To test it we had written a simple program to toggle pins. we have checked the code in keil and proteus. that is working fine.
We have dumped the code using H-JTAG emulator. It got dumped.
our problem is that we are unable to find any output at the pins.
some times we are able to see it and some times not.
we have verified the reset pin, vcc and ground pins and found them ok.....
i dont know where it went wrong......
help us out......
pavan