Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

--Can u help me to choose a NI hardware? --

Status
Not open for further replies.

yolande_yj

Full Member level 2
Joined
Jan 20, 2005
Messages
145
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
1,598
I am going to use Labview for my testing. I want to generate a digital signal of about 50BPS (or maybe 50MHz analog signal) using Labview. This signal goes out from my PC, processed, and comes back to my PC. I am looking for the low cost hardware from National Instrument that can do this job. Can someone suggest which product is suitable for this application? Thanks.

https://ohm.ni.com/advisors/board?cmd=NiCfgBoardIntroPage:Continue
 

soundar

Advanced Member level 4
Joined
Sep 26, 2003
Messages
109
Helped
15
Reputation
30
Reaction score
3
Trophy points
1,298
Location
Chennai, India
Activity points
567
Hi,
NI is having Analog I/O and Digital I/O in PCI and PXI platforms.
If you want low cost modules few companies are giving Analog Input and Analog Output Modules in different forms.
You can check NuDAM, NuDAQ ( External Module) type modules which can be controlled through LabVIEW and RS232 Port.
And many other Card Manufactures are also supporting LabVIEW.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top