Can communication problem.....

[jaga123]

i an working on a can project using mcp2515 as can controller.
If i have get a bit error , or stuff error in bus than how my controller will detect that is an error and which type ?
( i wanna to know how controller behave when get an error an how could i know about error...)

thank u in adv....

 

[horace1]

i an working on a can project using mcp2515 as can controller.
If i have get a bit error , or stuff error in bus than how my controller will detect that is an error and which type ?
( i wanna to know how controller behave when get an error an how could i know about error...)

thank u in adv....

if you go to the Microchip MCP2515 pictail plus page
https://www.microchip.com/Developmenttools/ProductDetails.aspx?PartNO=MCP2515DM-PTPLS

and under Package Contents download 'MCP2515 Pictal Plus daughter board firmware'
https://ww1.microchip.com/downloads/en/DeviceDoc/00194R1_ Firmware.zip
unzip it and you will find the CAN_spi_demo project with the CAN software

 

[jaga123]

thank u sir
but can i check error in programing .. by using mcp2515 resister... without analyzer...