gprashanth911
Newbie level 5
programming 89c2051
hi
i have made a manual programmer for 89c2051, it has dip switches to set the signals and code byte to be programmed. but the problem is when i follow the programming algoritm and try to read the signature bytes or flash, the controller does not respond. what could be the possible cause. please suggest the practical procedure to be followed for reading or writing the chip.
hi
i have made a manual programmer for 89c2051, it has dip switches to set the signals and code byte to be programmed. but the problem is when i follow the programming algoritm and try to read the signature bytes or flash, the controller does not respond. what could be the possible cause. please suggest the practical procedure to be followed for reading or writing the chip.