Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can a S52 be programmed with STK500?

Status
Not open for further replies.
RollingEEE

RollingEEE

Full Member level 3
Joined
Mar 25, 2006
Messages
165
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,298
Location
Bangladesh
Activity points
2,406
stk500 as an at89c51rx2

Can I use AVRdoper to program a AT89S51, S52 or S53 microcontroller?
 

avrdoper at89s51

Only 8051 parts support Self Programming (Software ISP) mode can operate on STK500, the AT89C51RC2 is an example of such device --- AT89Sxx devices are not.

As AVR-Doper is an STK500 compatible In-System Programmer (ISP), I guess you can't use AVRdoper to program a AT89S51, S52 or S53 micro controller

Read this Application Note for further information:
:arrow: Using the STK500 as an AT89C51Rx2 Target Board
This Application Note explains how to use the STK500 as a development board for 8051 Architecture microcontrollers.
 

stk500 at89s51

but S52 supports ISP programming and Asim ISP can program it. MOre over, STK500 has Mosi, Miso, sck, and reset, which are common for AVR and S52
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top