Hello friends i want to change pad size in eagle but the given pad sizes are in diameter of 2.54,3.81,6.45mm but inbetween sizes are not avilable i need 2mm, 3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm pads so please tell me how to change the pad sizes as per our needs is there any library avilable of different pad size . please help me its very urgent...
thank you......
ok friend can u say how to change the pad shape ,
i facing one more problem that is i cant get correct given measurement in printout in layout creating i dont know what is the reason can u help me through correct guiding for this problem and please say were are the places we have to give measurement in eagle software (im giving measurement in 'MM')
thank you......
You can do this directly on the brd if it's for a via, otherwise if you want to change the pad of a component you have to open and edit the relative library
thanks friend can u please say how to take printout (for legend,mask,route etc) in eagle with without any variation in size of board measurement .
thank you.
Maybe I don't get your question,
but you can simply turn on the needed (for printing) layers and choose "print" from the menu, leaving the scale factor set to 1
Anyway all this stuff is well documented in the Eagle manual (downloadable for free from cadsoft website )
I saw now your post.
I tried it, as in its documentation the generates a .scr file in the project folder.
Open and run it, it worked straightforward for me (never tried it before your request)
I saw now your post.
I tried it, as in its documentation the generates a .scr file in the project folder.
Open and run it, it worked straightforward for me (never tried it before your request)