_TopGun_
Member level 4
- Joined
- Aug 20, 2005
- Messages
- 75
- Helped
- 9
- Reputation
- 18
- Reaction score
- 3
- Trophy points
- 1,288
- Location
- Zelenograd, Russian Federation
- Activity points
- 1,696
Hi all!
I'm trying to run MixedSignal simulations under Cadence 5.0.33 in SuSE 9.3 Linux environment.
I have a project which combines cells, with schematic and verilog cellviews (my project is pretty simple, only three inverters).
On our SUN SPARC station there are no problems: simulation runs and all waveforms are shown correctly. Didgital part is shown as a separate waveform.
Under Linux environment Cadence shows only analog signals and i don't know how to display digital part.
Could anyone help mith this problem?
Thanks a lot.
I'm trying to run MixedSignal simulations under Cadence 5.0.33 in SuSE 9.3 Linux environment.
I have a project which combines cells, with schematic and verilog cellviews (my project is pretty simple, only three inverters).
On our SUN SPARC station there are no problems: simulation runs and all waveforms are shown correctly. Didgital part is shown as a separate waveform.
Under Linux environment Cadence shows only analog signals and i don't know how to display digital part.
Could anyone help mith this problem?
Thanks a lot.