hi . I would like to purchase an ARM based development board but there are so many boards available that I don't know which one to choose, so I will appreciate any piece of advice.
I want the board has USB, Ethernet and SD/MMC and also an embedded linux can run in it (so I suppose it must to be ARM9 or greater. I'm a beginner in ARM processors, so please forgive me if I'm wrong). Other capabilities don't matter.
my recommendation would be a board from Embedded Artists with an ARM7 and an LPC2478, provides everything you are asking for.
Some information about the LPC2000 devices, including the LPC2478 can be found here: http://www.lpc2000.com
In regards to tools, including boards, there is more information here: http://www.lpc2000.com/tools
Thank you bob for your suggestion. I suppose you refered to this board **broken link removed**
, which is very nice but it is too expensive for me
I found this one in the Olimex website https://www.olimex.com/dev/lpc-e2468.html as maheshkuruganti suggested. It comes with a pre-loaded uC Linux and it has just what I want (USB, Ethernet, SD/MMC).